1. The company has been engaged in installation, debugging, training and other technical services of gas generator for a long time.Contact number: 13676907460
2, the company can help users to maintain gas furnace, remove the difficult problems of gas furnace.
3. The company can process gas generator on site with reasonable price, advanced technology and excellent quality.
4. Requirements for coal addition to gas generator:
(1) in order to ensure the quality of gas furnace gas, uniform continuous coal, coal, coal, must be as far as possible according to the uniform time, interval coal, and should be less coal every time, appropriate forward the height of the carbon layer.The height of the carbon layer is first determined according to the blowing intensity. The appropriate forward carbon layer height can increase the steam differentiation rate and the quality of the forward gas.
(2) cloth coal type coal machine, request continuous, layer by layer evenly spread the coal on all furnace section, together with the request of severe sealing, to ensure that the furnace gas and external air convection.However, it should be timely adjusted according to the blowing intensity. According to the experience of relevant units, when the blowing intensity is relatively large, the air path height is usually controlled at 1.7 ~ 2.0m.
(3) the two-stage gas generator is in a single section of gas generator on the basis of the addition of a dry distillation section, so that the coal before gasification through full dry distillation, the coal evaporation before entering into the oxidation recovery before most of the separation, and with the upper section of gas out of the furnace.Double bell cover coal machine, connecting rod pull ratchet claw, ratchet wheel can make the camshaft of the coal machine rolling, and make the bell cover lever shake, the bell cover valve change to replace open and close.